Heres a few photos of replacing the stainless b pillar stickers that came on my crown, with new thick pieces of actual stainless.
Much better.
[MOD] Stainless B-Pillar
[MOD] Interior LED Conversion
I recently replaced the interior halogen lamps with LED’s.
The majority or the interior uses T10 wedge bulbs.
The boot uses a T10 wedge.
The rear number plate lights use a T10 wedge.
The front footwells use a T5 wedge.
The dome light uses a BA9S bayonet bulb.
The 2 front reading lights use a festoon bulb.
The 2 sunvisor mirrors use a fuse type bulb.
Install is very straightforward.
PHOTOS
[MOD] Coilovers Installed
The old coilovers were getting worse and worse, so I bought some new ones direct from Japan using the Jesse Streeter service.
The new coilovers are Final Konnexion Limited’s using Front 14kg/mm and Rear 10kg/mm spring rates.
The install procedure was very straightforward, removing the old and fitting the fresh suspension. It can be a little tricky trying to get the lower mount on the front, when the coilover length is set quite long.
PHOTOS
